TRAINER KITS

TEMPERATURE / PRESSURE / ELECTRICAL
for the Engineering Colleges / Instrumentation & Control / Electronics & Instrumentation Laboratory

Our Trainer Kits are not prototypes or breadboard designs just to fulfill the basic requirements of practical classes.

Our motto is to offer the real and right Instrument Trainer Kits, which will help the students to receive hands-on training, for handling today's Calibration, Test, Measurement and Process Control Instruments.

These value added knowledge will build-up the confidence (& competence) of the students to practice their duties, from the day one of employment as expected by the employers.

	TEMPERATURE MEASUREMENT / CONTROL KIT
	- using RTD & Thermocouple Transducers Model : TMK 600

	This training kit consists of
	Temperature Controlled Bath (with PD controller) with interchangeable insets
	An integral display for monitoring the set / read temperature of the control bath
	Three different digital panel meters housed in a box (to measure the output of the test transducers of types 'K' & 'J' thermocouples and Pt-100 RTD, and
	A set of three transducers (Probes)

Students can set the temperature of the controlled bath and insert different immersion type transducers. The output of the transducers (K & J type Thermocouple and Pt-100 RTD Transducers) can be measured directly in temperature (°C) centigrade using the digital panel meters provided.

This Bath (our standard Model 600S) can also be used as a Stable Temperature Source - Temperature Calibrator - to 'Calibrate' - a variety of field Temperature Sensors / Transducers / Devices. The Stability & Accuracy of the Bath are adequate for calibrating most Temperature Calibrators used in industrial process. A Traceable Calibration Certificate can be provided optionally.

Specifications

TEMPERATURE CONTROLLED BATH

Heating Process	1200 W Heater provided in closed box	Accuracy	±0.1% of FS + 1 Digit
Range	50° to 600°C	Stability	±0.5°C / 1°F
Controller	PD Controller	Well Dia / Depth	26 mm / 120 mm
Resolution	1°C/°F	Power Supply	220 VAC ±10%; 50 CPS

TEST TRANSDUCERS / PANEL METERS

Transducer Type Calibration & Range	Immersion Thermocouples & RTD Probes with flying Leads Thermocouples : K & J to ANSI Standard : Ambient to 600°C RTD : Pt 100 to DIN 43760 / IEC 751 standard.
Output Display	3½ Digit Panel Meters (built-in) calibrated in °C, Individually for K, J type Thermocouples & RTD
Display Resolution	1°C/°FAdditional Features Switch Test facility, Analog output (10 mV/°C)
Weight / Dimensions	14 Kgs. / 465 mm (W) x 350 mm (D) x 285 mm (H).

	PRESSURE MEASUREMENT KIT
	- using Pressure Transducers Model : PMK 5

	This training kit consists of

	Two pneumatic pumps (with suitable fine adjustment verniers) for generating (upto 5 bar) & vacuum (upto 0.8 bar)*
	Pressure Transducer
	Digital pressure indicator calibrated in six different engineering units.

Students can generate the required pressure or vacuum using the respective pump and feed it to the transducer. The output of the transducer is fed in to the digital meter to enable the students to read the output of the transducer directly in engineering (pressure) units & thus study its characteristics.

Additional Features

Pressure Switch Test facility

mA measuring facility for external Transducers / Transmitters

* Range of this Kit (Indicator) can be extended upto 10 or 20 Kg/cm2 with matching Pressure Transducer
& external Pressure generating Pump.

With its high resolution & accuracy, this kit can be used effectively as a CALIBRATOR to check/calibrate a variety of pressure devices including Pressure Gauges / Indicators; Pressure Switches; P/I Convertors; Differential Pressure Transmitters etc.

Specifications

Transducer	Pressure Transducer (Piezo-Electric)	mA Input	0 - 199.99 mA
Transducer Input	0.75 " diameter connector provided (Legris type quick fit for easy operation)	Analog Output	2 V for Full Scale
Range	-0.8 to 5 Kg /cm2	Pressure Buildup Facility	Built -in pumps (for generating pressure & vacuum) with Coarse & Fine Pressure / Vacuum control.
Maximum Capacity	7.5 kg/cm2 ( 150 % of rated capacity )	Weight	8.5 Kg.
Controls	Zero adjustment by multi-turn potentiometer	Dimensions	520 mm x 305 mm x 105 mm (W x D x H)
Display	4½ Digit (LCD) panel meter calibrated in 6 different pressure units (kg/cm2, bar, PSI, InHg, InWC HI, mWC LO) **	Battery	9 V

** Other Engineering Scales possible.

	INFRARED RADIATION TEMPERATURE MEASUREMENT TRAINER KIT
	- using Non-Contact Infrared Thermometer Model : IRMK 500

	This training kit consists of

	One Infrared Thermometer with Integral Digital Display
	One Temperature controlled Target (Source)
	Convenient platform (with rails) for focussing

	This kit will help students perform experiments (& receive training) on
	Infrared Radiation Measurement
	Principles of Focussing
	Distance to Target spot ratio etc.

Specifications

TEMPERATURE CONTROLLED BATH (SOURCE)

Heating Process	500 W Heater provided in closed box	Resolution	1°C
Range	50° to 500°C	Accuracy	±0.5% of FS + 1 Digit
Controller	PD Controller	Power Supply	220 V; 50 Hz ±10%

INFRARED THERMOMETER

Range	-20 to +500°C (-4 to 932°F)	Focussing	Laser sighting
Accuracy	±2% or ±2°C (3°F) whichever is higher	Power	9V Battery operated
Resolution	1°C / 1°F	Features	Laser Targetting; Laser On/Off Switch; °C/F selectable Switch; Automatic Power Off; Display Hold - to note experiment readings; LCD with backlit
Distance to spot ration (D:S)	8 : 1
Emissivity	Preset at 0.95

	P/I and I/P TRAINER KIT

	This Kit consists of P to I (Pressure to Current) and I to P (Current to Pressure) Transducers / Transmitters and Gauges with a combined unit for 4 to 20 mA generation and measurement to enable use as a mA measurement unit for P to I and mA generation unit for I to P.

	PHOTO-ELECTRIC TACHOMETERS TRAINER KIT

	This kit consists of a Photo-electric Sensor, a stand mounted Tachometer, specially designed motor, fixed pulley with wheels of different diameters & known RPM.