Portable Pneumatic Pressure Calibrator (Accuracy ±0.025% F.S.)

PPC-P+

• Ranges : -0.85 to 2 / 7 / 10 / 20 Bar

• Accuracy : ±0.025% F.S.

• Automatic Temperature Compensation (0 to 50°C)

• Light Weight & Compact

• Trendy, Elegant ‘Rugged’ Carry Case – Truly Portable

• Large Graphic Display

• Touch Membrane Keypad

• Selectable Engineering Pressure Units

• DC Current Measurement :
50 mA (Active) & 25 mA (Passive)

• Switch Test capability & Zero Offset facility

• Audio & Visual Alarms for Over Pressure

• Pressure Transducer – all Media compatible with SS316

• Rechargeable Battery with ‘Low Battery’ indication

• Built-in Pump & Fine Adjustment Vernier Assembly

Description

     

Ranges Pressure Switch Test
-0.85 to 2 / 7 / 10 / 20 Bar Maximum 5V DC (approx.)
Accuracy Housing
±0.025% F.S. Trendy, Elegant ‘Rugged’ Case – Truly Portable
Temperature Compensation Over Pressure Alarm
0 to 50°C (Automatic) 120% FS (Audio / Visual)
Resolution Pressure generation
Minimum 5 digits Integral / built-in Pump with Fine Adjustment Vernier & Release Valve
Display Battery
Large Graphic Display Rechargeable Battery & Charger
Engineering Units Low Battery Indication
Kg/cm2, Bar, mBar, PSI, mH2O, mmH2O, cmH2O, inH2O, ftH2O, mmHg, inHg, Atm, Mpa, Kpa, Pa Provided
mA Input Instrument Dimension

50 mA (Active Loop) & 25 mA (Passive Loop)

Load Resistance : 800            

330 x 235 x 125 mm (Lx B x H)         (2 / 7 / 10 Bar)
330 x 235 x 200 mm (Lx B x H)         (20 Bar)
Volt Input Instrument Weight
0 to 30V DC 4 Kg. (2 / 7 / 10 Bar);  6 Kg. (20 Bar)
Resolution (mA / V)  
0.001

• Digital Pressure Calibrator
• Set of Adaptors (BSP & NPT)
• Test Leads & Seals Kit
• Hose with End Fitting
• External Battery Charger
• RS-232 Computer Interface
• Calibration Certificate from NABL Accredited – as per ISO/IEC 17025:2005 Laboratory
• Instruction Manual

• “Calpress” Calibration Software

Reviews

There are no reviews yet.

Be the first to review “Portable Pneumatic Pressure Calibrator (Accuracy ±0.025% F.S.)”

Your email address will not be published. Required fields are marked *