Pneumatic Dead Weight Tester (Accuracies ±0.05% / ±0.025% of Rdg.)

P8000/P8600 Series

• Ranges : 0.5 to 1 / 2 / 10 / 20 / 35 Bar*

• Accuracy : ±0.05% & ±0.025% of Reading

• Single Piston type

• Non-Magnetic Stainless Steel Weight Sets

• Air / Gas operated

• Engineering Units : Bar / Kg/Cm2 / PSI

• Adjustable Foot & Spirit Level

• Piston Calibrated thro’ “Cross Float Techniques”

• Pressure generation direct via Priming Pump & Ram Screw

• Built-in / Integral (Priming) Pump
Maximum Pressure: 7 Bar
External Air supply required for Higher Pressures
(Integrated with Pressure Gauge & Regulator)

• Accuracies Traceable to International Standards

Description

 

Models Pressure Ranges
1 / Bar 2 / Kg/Cm2 3 / PSI
P8000-SP P8600-SP 0.5 to 1 (1000 mBar) 0.5 to 1 2 to 15
P8000-SP P8600-SP 0.5 to 2 (2000 mBar) 0.5 to 2 2 to 30
P8000-SP P8600-SP 0.2 to 10 0.2 to 10 5 to 150
P8000-SP P8600-SP 0.5 to 20 0.5 to 20 10 to 300
P8000-SP P8600-SP 0.5 to 35 0.5 to 35 10 to 500

External Pressure Source (for Models above 7 Bar) to be provided by customer.

  • Basic Instrument
  • Set of Adaptors (BSP / NPT)
  • Non-Magnetic Stainless Steel Weight Sets
  • Spirit Level, Dust Cover & Wooden Carrying Case (for Weight Sets)
  • Pointer Puller / Punch, Spanner Set & Screw Driver
  • ‘O’ Ring & Seals
  • Traceable Calibration Certificate (for P8000 Series)
  • Calibration Certificate from NABL Accredited – as per ISO/IEC 17025:2005 Laboratory (for P8600 Series)
  • Instruction Manual
  • Two Gauge & Right angled Adaptors
  • Conversion Weight Sets to convert from one unit of Pressure to another
  • Incremental Weight Sets for smaller increments of Pressure
  • Calibration Certificate from NABL Accredited – as per ISO/IEC 17025:2005 Laboratory (for P8000 Series)

Reviews

There are no reviews yet.

Be the first to review “Pneumatic Dead Weight Tester (Accuracies ±0.05% / ±0.025% of Rdg.)”

Your email address will not be published. Required fields are marked *