Pneumatic Pressure Calibrator (Accuracy ±0.025% F.S.)

MPC-P+

• Ranges : -0.85 to 2 / 10 / 20 / 35 / 40 / 60 bar

• Accuracy : ±0.025% F.S.

• Automatic Temperature Compensation (0 to 50°C)

• Graphic Display

• Touch Membrane Keypad

• Selectable Engineering Pressure Units

• DC Current Measurement : 50 mA (Active) & 25 mA (Passive)

• Switch Test capability & Zero Offset facility

• Audio & Visual Alarms for Over Pressure

• Pressure Transducer – all Media compatible with SS316

• Rechargeable Battery with External Charger

• Digital Pressure Indicator with matching Pneumatic Hand Pump with Vernier

Description

 

Ranges   Resolution (mA / V)
-0.85 to 2 / 10 / 20 / 35 / 40 / 60 bar 0.001
Accuracy   Pressure Switch Test
        ±0.025% F.S.         Maximum 5 VDC
Temperature Compensation   Over Pressure Alarm
0 to 50°C (Automatic)        120% FS (Audio / Visual)
Resolution   Pressure generation
Minimum 5 digits Thro’ matching Pneumatic Hand Pump with Fine Adjustment Vernier & Release Valve
Display   Battery Type
        Graphic        Rechargeable Battery
Engineering Units   Low Battery Indication
Kg/cm2, Bar, mBar, PSI, mH2O, mmH2O, cmH2O, inH2O, ftH2O, mmHg, inHg, Atm, Mpa, Kpa, Pa        Provided
mA Input   Instrument Dimension                                      Weight
50 mA (Active Loop) & 25 mA (Passive); Load Resistance : 800 420 x 340 x 120 mm (L x B x H)               5 Kg.
Volt Input    
        0 to 30V DC

• Pressure Indicator with matching Hand Pump
• Set of Adaptors (BSP & NPT)
• Test Leads & Seals Kit
• Hose with End Fittings
• External Battery Charger
• RS-232 Computer Interface
• Carrying Case
• Calibration Certificate from NABL Accredited – as per ISO/IEC 17025:2005 Laboratory
• Instruction Manual

• “Calpress” Calibration Software

Reviews

There are no reviews yet.

Be the first to review “Pneumatic Pressure Calibrator (Accuracy ±0.025% F.S.)”

Your email address will not be published. Required fields are marked *