Pneumatic Pressure Calibrator (Accuracy ±0.05% F.S.)

MPC-P

• Ranges : -0.85 to 2 / 10 / 20 / 35 / 40 / 60 bar

• Accuracy : ±0.05% F.S.

• Automatic Temperature Compensation (0 to 50°C)

• 2 line Alpha-numeric Display

• Touch Membrane Keypad

• Selectable Engineering Pressure Units

• DC Current Measurement : 50 mA (Active)

• Switch Test capability & Zero Offset facility

• Audio & Visual Alarms for Over Pressure

• Pressure Transducer – all Media compatible with SS316

• 9V Battery operated with ‘Low Battery’ indication

• Digital Pressure Indicator with matching Pneumatic Hand Pump with Vernier

Description

 

Ranges   Resolution (mA / V)
        -0.85 to 2 / 10 / 20 / 35 / 40 / 60 bar         0.01
Accuracy   Pressure Switch Test
        ±0.05% F.S.         Maximum 5 VDC
Temperature Compensation   Over Pressure Alarm
        0 to 50°C (Automatic)        120% FS (Audio / Visual)
Resolution   Pressure generation
        Minimum 5 digits

Thro’ matching Pneumatic Hand Pump with Fine Adjustment Vernier & Release Valve

Display   Battery Type & Life
        2 line, 16 Characters LCD        9 Volts; Approx. 12 Hours
Engineering Units   Low Battery Indication

Bar, PSI, Kg/cm2, Kpa, Mpa, mmHg, Atm, mH2O, inHg, ftH2O, cmH2O, Pa, mBar

       Provided
mA Input   Instrument Dimension                                      Weight
        50 mA (Active Loop); Load Resistance : 800         420 x 340 x 120 mm (L x B x H)               5 Kg.
Volt Input    
        0 to 30V DC

• Pressure Indicator with matching Hand Pump
• Set of Adaptors (BSP & NPT)
• Test Leads & Seals Kit
• Hose with End Fittings
• 9V Alkaline Battery
• Carrying Case
• Traceable Calibration Certificate
• Instruction Manual

• RS-232 Computer Interface
• “Calpress” Calibration Software
• Rechargeable Battery & External Charger
• Calibration Certificate from NABL Accredited – as per ISO/IEC 17025:2005 Laboratory

Reviews

There are no reviews yet.

Be the first to review “Pneumatic Pressure Calibrator (Accuracy ±0.05% F.S.)”

Your email address will not be published. Required fields are marked *