Hydraulic Pressure Calibrator (Accuracy ±0.025% F.S.)

MPC-H+

• Ranges : 0 to 70 / 100 / 200 / 350 / 600 / 700 Bar

• Accuracy : ±0.025% F.S.

• Automatic Temperature Compensation (0 to 50°C)

• Graphic Display

• Touch Membrane Keypad

• Selectable Engineering Pressure Units

• DC Current Measurement : 50 mA (Active) & 25 mA (Passive)

• Switch Test capability & Zero Offset facility

• Audio & Visual Alarms for Over Pressure

• Pressure Transducer – all Media compatible with SS316

• Rechargeable Battery with External Charger

• Digital Pressure Indicator with matching Hydraulic Hand Pump with Vernier

Description

Ranges
0 to 70 / 100 / 200 / 350 / 600 / 700 Bar
Accuracy
±0.025% F.S.
Temperature Compensation
0 to 50°C (Automatic)
Resolution
Minimum 5 digits
Display
Graphic
Engineering Units
Kg/cm2, Bar, mBar, PSI, mH2O, mmH2O, cmH2O, inH2O, ftH2O, mmHg, inHg, Atm, Mpa, Kpa, Pa
mA Input
50 mA (Active Loop) & 25 mA (Passive Loop); Load Resistance : 800           
Volt Input
0 to 30V DC
Resolution (mA / V)
0.001
Pressure Switch Test
Maximum 5 VDC
Over Pressure Alarm
120% FS (Audio / Visual)
Pressure generation
Matching Hydraulic Hand Pump with Fine Adjustment Vernier & Release Valve
Battery
Rechargeable Battery
Low Battery Indication
Provided
Instrument Dimension                                      Weight
480 x 260 x 150 mm (L x D x H)                  7 Kg.

• Pressure Indicator with matching Hand Pump
• Set of Adaptors (BSP & NPT)
• Test Leads & Seals Kit
• Hose with End Fittings
• External Battery Charger
• RS-232 Computer Interface
• Carrying Case
• Calibration Certificate from NABL Accredited – as per ISO/IEC 17025:2005 Laboratory
• Instruction Manual

• “Calpress” Calibration Software

Reviews

There are no reviews yet.

Be the first to review “Hydraulic Pressure Calibrator (Accuracy ±0.025% F.S.)”

Your email address will not be published. Required fields are marked *