Hydraulic Pressure Calibrator (Bench Mounted) – Accuracy ±0.025% F.S.

MPC-H-B+

• Ranges : 0 to 70 / 100 / 200 / 400 / 600 / 700 Bar

• Accuracy : ±0.02% F.S.

• Automatic Temperature Compensation (0 to 50°C)

• Advanced Technology

• Light Weight / Compact

• Trendy, Elegant Case – Truly Portable – Lab / Site use

• Resolution : Minimum 5 digits

• Large Graphic Display

• Touch Membrane Keypad

• Selectable Engineering Pressure Units

• DC Current Measurement : 50 mA (Active Loop) & 25 mA (Passive Loop)

• Switch Test capability & Zero Offset facility

• Audio & Visual Alarms for Over Pressure

• Pressure Transducer – all Media compatible with SS316

• Matching External Hydraulic Hand Pump

• Panel Mounted Model with External Pressure Module(s) (EPM) – Refer specifications inside…

Description

Ranges Pressure Switch Test
0 to 70 / 100 / 200 / 350 / 600 / 700 Bar   Maximum 5 VDC
Accuracy Over Pressure Alarm
±0.02% F.S. 120% FS (Audio / Visual)
Resolution Pressure Generation
Minimum 5 digits Matching External Hydraulic Hand Pump with Fine Adjustment Vernier & Release Valve
Display Battery Type & Life
Graphic Rechargeable Battery
Engineering Units Low Battery Indication
Kg/cm2, Bar, mBar, PSI, mH2O, mmH2O, cmH2O, inH2O, ftH2O, mmHg, inHg, Atm, Mpa, Kpa, Pa Provided
mA Input Instrument Dimension                               Weight
50 mA (Active Loop) & 25 mA (Passive Loop)Load Resistance : 800 480 x 280 x 160 mm (L x D x H)               7 Kg.
Resolution (mA / V)  Instrument Casing
0.01 Trendy, Elegant Case – Truly Portable
Temperature Compensation Volt Input
0 to 50°C (Automatic) 0 to 30V DC

• Pressure Indicator with matching Hand Pump
• Set of Adaptors (BSP & NPT)
• Test Leads & Seals Kit
• Hose with End Fittings
• External Battery Charger
• RS-232 Computer Interface
• Carrying Case
• Calibration Certificate from NABL Accredited – as per ISO/IEC 17025:2005 Laboratory
• Instruction Manual

• “Calpress” Calibration Software

 

Panel Mounted Model with External Pressure Module(s)

Internal Sensor Ranges & Other Specifications (as in Bench-top Models)

 

EPM Ranges      Pneumatic        -0.85 to 2 / 7 / 10 / 20 / 35 / 40 Bar

Hydraulic          0 to 70 / 100 / 200 / 400 / 600 / 700 Bar

EPMs                  2 / 3 / 4

Accuracies         ±0.05% F.S. / ±0.025% F.S. / ±0.02% F.S.

Mounting            Panel Mounted (19” Rack Size)

Dimensions       350 x 185 x 178 mm (L x B x H) – Typical for 3 EPMs

 

Reviews

There are no reviews yet.

Be the first to review “Hydraulic Pressure Calibrator (Bench Mounted) – Accuracy ±0.025% F.S.”

Your email address will not be published. Required fields are marked *