Pressure Calibrators, Controllers, Standards & Testers

PRESSURE CALIBRATORS, CONTROLLERS, STANDARDS & TESTERS

- the total range Digital S.M.A.R.T. Calibrators / Controllers / Dead Weight Testers / Comparison Testers / Master Gauges / Manometers

- brief specifications -

Pressure Calibrators

	Microprocessor based S.M.A.R.T. Pressure Calibrator	MPC-E	Detailed Datasheet

	Ranges ±2000/±5000/±8000 mmWC; -0.85 to 2 upto 40 Bar (Pneumatic); 0 to 70 upto 700 Bar (Hydraulic), Resolution Minimum 4½ Digits, 2 line 16 Character LCD Display, Accuracy ±0.15%/0.1% FS, mA Measurement (0 - 25 mA DC), Multiple Engineering Units selection. All media compatible - optional. (This range effectively replaces Nagman's well established (VLPC/LPC/PCI Series) Digital Calibrators).	BUDGET SOLUTION

	Advanced Microprocessor based S.M.A.R.T. Pressure Calibrator	MPC	Detailed Datasheet

	The High Accuracy Master Standard - Ranges Pneumatic -0.85 to 2 upto 40 bar; Hydraulic 0 to 70 upto 700 bar, Resolution : Minimum 5 Digits, 2 line 16 character LCD Display, Accuracy (0 to 50°C Automatic Temperature Compensated) : ±0.05% FS., Multiple Engineering Units selection, mA/V measurement (0 - 50 mA/30 VDC), Mean/Peak/Valley Measurement, all Media Compatible.

	Benchtop / Panel Mounted Microprocessor based S.M.A.R.T. Pressure Calibrator	MPC-E-B MBC-B	Detailed Datasheet

	Microprocessor based Pressure Calibrators / Modules - Ranges Pneumatic -0.85 to 2 upto 40 Bar; Hydraulic 0 to 70 upto 700 Bar, Accuracy ±0.1% FS/ ±0.05% FS. Dual/Multiple Pressure Range Modules - optional. Other specifications as above in MPC-E / MPC.

MPC/MPC-B Series models are available with
RS-232 Computer Interface & "CALPRESS" Calibration Software option.
Pressure Switch Test facility available on all models.

For all the above Models, a wide variety of
External matching Pneumatic/Hydraulic Hand Pumps with Vernier
are available (see under Hand Pumps).

Pressure Calibrators - New Models

	Portable & Compact Pressure Calibrators	CPC	Detailed Datasheet

	The feature packed compact jewel box - Ranges -0.80 to 2/5/7 Bar, Accuracies ±0.1%/0.05% FS* & -0.8 to 1 Bar & ±2000/±5000/±8000 mmWC, Accuracies ±0.075%*/±0.15% F.S. with Integral Pressure/Vacuum Pumps & Fine Resolution Vernier.

	Portable Pressure Calibrator - Pneumatic	PPC-P	Detailed Datasheet

	The ultimate Pneumatic Calibrator for rugged field use - Ranges -0.8 to 2/5/7/10/20 bar, Accuracies ±0.1%/0.05% FS*, Integral Hand Pump with Vernier adjustment; sturdy FRP housing. (Graphical Display - optional).

	Portable Pressure Calibrator - Hydraulic	PPC-H	Detailed Datasheet

	The ultimate Hydraulic Calibrator for rugged field use - Ranges 0 to 200 / 400 bar, Accuracies ±0.1%/0.05% FS*, Integral Hand Pump - with Pressure/Vacuum Changeover Switch, Fine Adjustment Vernier & Release Valve, sturdy FRP housing. (Graphic Display - optional).

	Microprocessor based (Pneumatic) Pressure Controllers	DPC	Detailed Datasheet

	Bench-top/Panel Mounted - Range 0 upto 10 Bar^††, Resolution 0.01, Control Accuracy ±0.2%/±0.1% F.S. (External Pressure Source required).

^†† Range upto 60 Bar will be available soon.

* 0.05% F.S. / 0.075% F.S. Accuracies are Automatic Temperature Compensated for 0 to 50°C

Hand Pumps

	Pneumatic Hand Pumps	PHP 25 (35)
			Datasheet Page 1
	Ranges -0.85 upto 10 / 25 (35) Bar, Resolution 1 mbar, Very Low Leakage rate, stroke adjustment & fine adjustment vernier.		Datasheet Page 2

	Hydraulic Hand Pump (Medium / High Pressure)	HHP 350 / 700
			Datasheet Page 1
	Ranges -0 to 350 Bar (Medium Pressure) / 700 Bar (High Pressure) with transparent fluid chamber (Reservoir) - for easy viewing of fluid level. Easy grip spring loaded, scissor action, Fine adjustment Vernier, Pressure Release Valve.		Datasheet Page 2

Dead Weight Testers

- Models / Accuracies to suit every budget / need

	Hydraulic Dead Weight Testers *	3000 / 6000 Series	Detailed Datasheet

	ideal for Fine increment & for Medium Volume Calibration - Oil operated, Screw Pump with built-in Priming Pump & Ram Screw, Single/Dual Piston, Ranges 35/70/160/350/600 bar, Accuracies 0.1%/0.05% & 0.025% of rdg., Units : Bar/Kg/Cm2/PSI, Phosphated Mild Steel/Stainless Steel/Brass Weights.

	Hydraulic Dead Weight Testers *	4000 / 7000 Series	Detailed Datasheet

	Serves large volume calibration requirements at higher pressures - Oil operated, Hand Pump with Vernier Adjustment, Single/Dual Piston, Ranges 35/70/160/350/600 bar, Accuracies 0.1%/0.05% & 0.025% of rdg., Units : Bar/Kg/Cm2/PSI, Phosphated Mild Steel/Stainless Steel/Brass Weights.

	* Special Range 700 bar & Higher Accuracy 0.02% available. Consult us.

	Pneumatic Dead Weight Testers	5000 / 8000 Series	Detailed Datasheet

	Air/Gas operated, Pressure & Vacuum (Conversion Kit), Single Piston, Ranges from Vacuum upto 35 bar, Accuracies 0.1%/0.05% & 0.025% reading, Units : Bar/Kg/Cm2/PSI; Vacuum mBar/mmHg (with built-in Hand Pump upto 10 bar).

	Common for above 3 Series :

	Traceable Calibration Certificate : - 0.1% Model - Certificate for overall Accuracy - 0.05% & 0.025% Models - Certificate† for overall Accuracy, PCU (area) & Weights (Mass) († 0.025% Model - Certificate issued by NABL Accredited Centre for Calibration) - Weight Set in Wooden/Steel Carrying Case.

	Options : Motorized operation/Tripod mounting; NABL Certificate of Calibration for 0.1 & 0.05% Reading Accuracy models.

	Optional Accessories : Liquid to Liquid separator (water/oil) , Angle Adaptor, Two Gauge Stand, Pointer Puller / Punch, Adaptors / Spanner Set.

	Hydraulic Deadweight Testers	PHS 9000 Series	Detailed Datasheet

	Oil operated Vertical/Horizontal type Ram Screw Pump with built-in Priming Pump, Single/Dual Piston, Weights/Pump all mounted in sturdy wooden / steel box ready for field operation : Range : upto 600 bar, Accuracy (std.) 0.05% rdg., Units : Bar / Kg/cm2 / PSI.

	2-in-1 Comparison Tester cum Dead Weight Testers		Detailed Datasheet

	Economy/Budget solution Models (please see under Comparison Testers).

COMPARISON TESTERS

- Widest Range - Oil/Water operated, Screw/Hand Pump Models

	Model : GCL 250-SP / GCL 350-SP		Detailed Datasheet

	A simple Ram Screw Pump with Oil Reservoir for priming, Fine Adjustment of Pressure, Range 0 to 250 Bar/350 Bar, Water/Oil operated, Gauge Fitting 1/2" BSP (F) (Swivel)

	Models : GCH 400-HP (MHP-400) / GCH 700-HP - P141 / P142		Detailed Datasheet

	Hydraulic Hand Pump fitted with a Divider Block/Fine Adjustment Vernier. Ideal for volume applications, Range 0 to 400/700 Bar, Oil operated, Gauge fitting 1/2" BSP (F)(Swivel)

	Model : GCH 600-SPB† / 700-SPB		Detailed Datasheet

	Hydraulic Ram Screw Pump fitted with Oil reservoir for priming & a manifold block. Fine Adjustment of Pressure. Mounted on a sturdy base plate, Range 0 to 600 / 700 Bar, Medium Oil (optional Water), Gauge fitting 1/2" BSP (F) (Swivel)

	(† This model can also double as a Single Piston Dead Weight Tester with optional PCU & Weight Sets (Accuracy 0.2% rdg.)).

	Model : GCH 600-SPES / GCH 700-SPES		Detailed Datasheet

	Hydraulic Ram Screw Pump fitted with Oil reservoir for priming & a manifold block. Fine Adjustment of Pressure, Mounted on an elevated stand, Range 0 to 600 Bar/700 Bar, Medium Oil, Gauge fitting 1/2" BSP (F) (Swivel)

	Models : GCH 600-SPHD / GCH 600-SPHD/DWT† (2-in-1)		Detailed Datasheet

	Heavy duty model with Hydraulic Ram Screw Pump with Oil reservoir, Priming Pump, Fine Adjustment of Pressure, Isolating Valve & 3 gauge stand all housed in a sturdy sheet metal (carry) box (with lid).

† This "Deluxe" model Comparison Tester doubles as a Single Piston Dead Weight Tester with PCU & weight sets (accuracy of 0.2% Reading), Range upto 600 Bar, Medium Oil, Gauge fitting 1/2" BSP (F) (Swivel).

MASTER / STANDARD GAUGES

- Analog & Digital - to go with Comparison/Dead Weight Testers

	ANALOG		Detailed Datasheet

	Range 0 upto 600 Bar (all Standard DIN Ranges), Accuracy ±0.5%/±0.25%/0.1% F.S. Dial Size 160/250 mm. Fine Resolution Dial & Knife Edge Micro-pointer with Zero Adjuster; Gauge Connections 1/4" or 1/2" BSP (M)

	DIGITAL		Detailed Datasheet

	Range 0 upto 700 Bar, Accuracy 0.1% & 0.05% FS with high Resolution (4½/5 digits), Multiple Engineering Scales, mA Input, (optional RS-232 Computer Interface/Calibration Software, Battery Charger etc.) - refer under Digital Smart Calibrators (MPC/MPC-E).

MANOMETERS

- U-Tube / Single Limb / Inclined

	SINGLE LIMB WELL TYPE MANOMETER	MM-111	Detailed Datasheet
		MM-111-PT	Detailed Datasheet
	Direct Reading, Accurate Measurement of Pressure, Vacuum or Differential Pressure. Wall/Flush/Base Mounting, Mercury/Water Filling , Ranges 60 upto 250 cms/24 upto 100", Resolution 1 mm/0.1", Standard Accuracy ±0.2% ±0.5 mm

	'U' TUBE MANOMETER	MM 103	Detailed Datasheet

	Wall/Flush/Base Mounting, Mercury/Water Filling, Measurement of Differential Pressure, Pressure & Vacuum. Ranges from 120-0-120 upto 1000-0-1000 mm, Resolution 1 mm, Standard Accuracy ±0.2% ±0.5 mm

	INCLINED MANOMETER	IM-113	Detailed Datasheet

	Wall/Flush/Base Mounting, to measure very low pressure, low draft or small differential pressure changes in gas flow metering etc. Ranges 12 upto 750 mm, Resolution 0.1/0.25/0.5/1 mm, Accuracy ±0.25% + 1 division

Home | News | Export | Search | Career | Sitemap | About Us | Principals | Bargains | Products | Projects | Contact Us

CEO's Message | Group Companies | Query Submission | Calibration Center | Customer Opinion