DEAD WEIGHT TESTERS

PORTABLE MODELS

PHS 9000 Series - Hydraulic, Precision

The PHS 9000 Series Dead Weight Tester is a fully portable Hydraulic Precision Dead Weight Tester with 0.05% reading accuracy specially designed for the oil & gas industry - for rugged field use. These deadweight testers are supplied with certificates for overall accuracy, piston area and masses.

Unique Features

— Model truly portable. The Dead Weight Tester is supplied fixed to a sturdy wooden box for carrying onto the field and
can be conveniently and safely operated without removing it from the wooden box.
— Also, when not in use, weights can be stored - mounted firmly onto the dead weight tester base plate.
— Priming pump with oil reservoir (100 ml) enables priming operation and priming of oil into small volumes.
— Dual piston at medium and high pressures enables ultimate flexibility in measurement.
— Smaller weight intervals : 0.1 bar / 1 PSI possible.
— Dead weight testers can be supplied Calibrated to your local gravity value (please specify while ordering).

Additional Features

— Standard Calibration Accuracy : 0.05% of indicated Pressure ^††
— Hardened stainless steel pistons and matching cylinder.
— Stainless Steel / Brass Weight Sets
— NABL Traceable Calibration Certificates for overall Accuracy / PCU (area) & Weights (masses).
— Vertical type Ram Screw (pump) for fine pressure adjustment. Horizontal type Ram Screw (Pump) /
Hydraulic Hand Pump designs also possible.
— Leveling feet / Sprit Level provided
— Wooden box interior coated with oil proof paint - oil drain hole provided.
— Sturdy Wooden Carry box (approx. Dimensions : 560 x 400 x 320 mm)
— Gross Weight of Dead Weight Tester with Wooden Box: 50 to 70 Kgs.

Ideal for the Oil & Gas Industry / Pipeline Projects / Rugged field use


	Hydraulic Deadweight Testers Oil operated Vertical/Horizontal type Ram Screw Pump with built-in Priming Pump, Single/Dual Piston, Weights / Pump all mounted in sturdy wooden box ready for field operation : Range : upto 600 bar, Accuracy (std.) 0.05% rdg., Units : Bar / Kg/cm2 / PSI.		PHS 9000 Series

Standard Delivery

— Dead Weight Tester with calibrated Weight Sets in a wooden box.		— Adaptors : 1/8, 1/4", 3/8", 1/2" BSP (NPT Adaptors are available on request)
— NABL Traceable Calibration Certificates.		— Tool Set
— Operating Instructions		— Set of spare seals
— Operating fluid (1 litre)

Optional Accessories (for all Models)

— Master / Standard Pressure Gauges - Analog (150 / 250 mm Dia) - with 0.1 / 0.25 / 0.5% F.S. Accuracy to all DIN Standard Ranges		— Incremental Weight Set — Liquid to Liquid Separator
— Master / Standard Pressure Gauges - Digital - with 0.2% / 0.1% / 0.05% F.S. Accuracies in various ranges.		— 2 Gauge Stands — Angle Adaptor
— Motorized / Tripod Types		— NPT/BSP Adaptor Sets.
— Conversion Weight Set (Kg/cm2 / Bar / PSI)

Ordering Codes :

Models : Prefixing PHS9000 (instead of H6000). Available Pressure Ranges / Weights etc. as in H6000 Series.
Standard Accuracy : 0.05% of reading)^††. Higher/ Lower Accuracy (0.025%/0.1%) Models available - Kindly consult us.

*      Aluminium Weights for the low / initial ranges.

**    These Testers can also be calibrated - thro' Cross Floating Technique - & certified by our NABL (equivalent to UKAS) accredited "Centre for Calibration"
       at an additional cost - please consult us.

^†     With Tripod Mounting option the Table top models can be used at site rendering 'portability'.

^††    Higher Accuracy (0.02%) Models available on select Ranges - consult us.


	2-in-1 Comparison Tester cum Dead Weight Tester Economy/Budget solution Models.