CALIBRATION SERVICES

CENTRE FOR CALIBRATION


C-0162, C-0163, C-0164

NABL Accredited Laboratory
for
Thermal & Optical, Electro-Technical & Mechanical Parameters
The CENTRE FOR CALIBRATION (CFC) is an 'Independent Profit Centre' Unit of Nagman Instruments & Electronics (P) Ltd.

The Centre is equipped with sophisticated Calibration equipment - both Primary and Working / Transfer Standards. The Calibration Accuracy of these Master Standards are traceable to National & International Standards. Facility includes Computerized Automatic Calibration & Report generation conforming to ISO Standards.

Nagman Centre for Calibration offers a wide range / variety of CALIBRATION related Services covering most Process Parameters - & serves almost every type of Industry / Institution / Establishment.

Nagman Centre for Calibration enjoys the unique distinction of obtaining NABL Accreditation (as per ISO/IEC 17025:2005) simultaneously for 3 Parameters - Mechanical (Pressure & Mass) / Electro-Technical / Thermal. (Click here to view the NABL Certificates : Thermal, Electro-Technical & Mechanical)

Nagman Centre for Calibration is a Member of the Metrology Society of India (MSI).

Nagman Centre for Calibration's wide range of services include….

  —    Laboratory Calibration - including "Express" - same day Calibration
  —    Site Calibration : during planned Shutdown / Routine Maintenance / Commissioning / Performance Trials
  —    Mobile Calibration Laboratory : Calibration Service at your door steps!
  —    Annual Maintenance / Calibration Contracts : periodic visits on preplanned dates
  —    Comprehensive Calibration Job Packages : including mobilization of Master Standards, manpower etc.
  —    Consultancy Services : Nagman's Centre for Calibration provides Consultancy Services in
          a. Identifying Master equipment & setting up a Calibration Laboratory as per ISO/IEC 17025:2005
          b. Training in BMC, conducting PT, Internal Audit, Management Review, Document preparation etc.
          c. Training the staff to run the Laboratory as per ISO/IEC 17025:2005
          d. Assisting in getting NABL Accreditation




 

—    Calibration Seminars / Training : (Click here to view the Hand Book & Training Calendar)

 

Nagman's Centre for Calibration offers on a regular basis Training - in Techniques & Methods for Technicians & Engineers, and in Calibration Laboratory Management for Managers. Short duration Training Program for Marketing & Senior Executives are also available. Training courses are well structured and if required can be made customer specific.
Training includes theoretical aspects followed by hands-on practical exposure imparted in Nagman's Training Centre which is well equipped with modern training aids & facilities.
Training Programs can also be organized / conducted at customer's premises if the number of persons to be trained justify this.


  —    Calibrator Rentals (first time in India) (Click here to view details of Instruments, Gauges & Rent)  

A wide variety of Portable Calibrators, Transfer Standards, Simulators, Dead Weight Testers etc. - boon to Project Consultants / Executants / Erection & Commissioning Contractors.

Most common Parameters Calibrated @ Nagman's Centre for Calibration includes :

              —    Pressure, Vacuum
              —    Mass
              —    Temperature (including non-contact)
              —    Voltage / Current / Resistance / Frequency / Capacitance
              —    pH / Conductivity / Relative Humidity (% RH) / Time / Speed
              —    Sound Level

 The unique facilities at the Centre include :

Cross Float Calibration facility for Calibration of Precision Dead Weight Testers (Uncertainty 50 ppm and range from –1 to 1400 Bar) (Certified by & Traceable to NIST – U.S.A., NIM – China & UKAS – England).

High Pressure Precision Hydraulic Dead Weight Testers – upto 1000 Bar.

Precision Mass Balances & Standard Masses (from 1 mg to 55 Kg, BMC 0.017 mg. to 24 g)

Ultra Low Pressure Dead Weight Testers & Micromanometers (Resolution / Accuracy down to 0.1 pa)

– with these above facilities & with our Dead Weight Tester manufacturing capabilities, repair, recalibration including total replacement of PCU & trimming of Masses also possible for Hydraulic / Pneumatic Dead Weight Testers – any make – SI Pressure / Ametek / Pressurements / Budenburg or Ravika / Apex etc. – we give your old Dead Weight Testers a new lease of life…!

Agilent make 8½ digits Multimeter

High Current / Voltage Sources & Standard 3 Phase Power Meter

WavetekDatron 9100 Universal / Multifunction Calibrator

Black Body Sources (to 1300°C) & Ultra High Temperature Calibration Furnace (1500°C)

Standard / Precision RTD / Thermocouple Probes (upto 1500°C) (traceable to NPL, India / UKAS, England)

Computer Aided Calibration Certificate generation to ISO Standards and traceable to National / International Standards.

For more information / interaction, kindly contact
Mr. V.B. VENKATESWARAN
Executive Director - Calibration Services
Phone : 044-26811776, 26811710.     Mobile : 9381066617


                                                                                                        

Calibration Services Catalog

Pages

1

2

3

4

5

6

7

8

9

10

NABL Accredited Certificates                                     Thermal     Electro-Technical      Mechanical

Rental of Master Instruments / Pressure Gauges        Rates

Training Hand Book

Pages

1

2

3

4

 

 

 

 

 

 

Training Calendar                                                      Calendar